Leidi 660

16.01.2015 nauCAT
  •  Share on X
Leidi 660

Leidi 600 has been from the very beginning gained favour of the nautical audience, due to neatly attractive retro lines, wealthy standard equipment and excellent sea keeping. New Leidi 660 is second generations this boat from 6+ meters, improved characteristics in all segments. She is a true small family cruiser that many people will want to have on their boat berth. This boat is designed for families with children, elderly couple, or for people who want to enjoy a good weekend with friends at sea. Leidi 660 will provide maximum comfort on open sea or anchorage, and will make the owner proud in every aspect. Maximum utilization of the hull creates space below decks that can be compared with the much longer vessels, and the traditional commitment of the Leidi shipyard to all details, and final touches are a guarantee that Leidi 600 boat will become a leader in this class of vessels.

The design follows the guidelines set in the larger model, Leidi 800, with retro style colored hull, roof and integrated solar panels. The maximum dimensions of side windows allow an abundance of light and greeater enjoyment on the sea, while single windshield glass, same as we have on bigger model (leidi 800) increases visibility and safety of the boat.

Designed for longer cruises, Leidi 660 offers a sufficient number of beds for three adults or two adults with children. She offers two versions with separate toilet area, or with integrated toilet under the bed, making it possible to have bigger dormitories and monovolumen space below decks. Also on this model there are four frontal cabin windows (most in the class) providing more daylight and translucence.

Photo: Leidi

Key Feauters:

Hull
• Deeper V profile in frontal part of the boat contributes to more comfortable driving
Longitudinal fins take care of maximum control and prevent ‘sliding’ in sudden side turns and also direct the sea strikes to the hull side
• A special form of the underwater part of the bow eliminates unwanted prow ‘steering’

Cockpit
• Elevated longitudinal limiter contributes to the stability and comfort of the boat, and also allows wide sliding bench alongside the vessel
• Stern bench with the closure of the outboard motor engine well is now used in full width
• Enabled easier entry into the cockpit from stern platform
• Stern platforms covered with teak in standard version
• Standing height at the cabin entrance (184cm)

Deck
• Higher side passes enable easier movement to the prow
• Sunbathing area on the frontal part of the cabin
• Integrated bowsprit for better firmness with a weight reduction contains elegantly placed anchor that does not bother when getting down the boat

Interior

Upper cabin
• Standing height in saloon(195 cm)
• Deck saloon – booth in windows level for even more comfort, by lowering turns in bed (185 x 75 cm)
• Enabled the installation for two refrigerators
• More spacious kitchen block with cabinets for dishes and other kitchen equipment
• Waterproof storages under the flooring in the hallway and under the table are sufficient for storing weekly food supplies and equipment
• Raised helm station provides excellent visibility in navigation
• Big helm console is enough to accommodate all the necessary devices and equipment

Lower deck
• Easier entrance into a large serene toilet area with window (dimensions 70x70x160cm)
• Enabled the installation of a large wardrobe closet 80x40x50 cm
• Hanging cabinets above the bed
• Height in lower deck 156 cm(110cm above the bed)
• Possibility of two variants: separate toilet area, or bathroom with integrated partial bulkhead under the bed

Technical details
Producer: LEIDI Obrt za popravak i proizvodnju plastičnih plovila (HR)
LOA: 23'61 ft
LOA: 7,20 m
Hull lenght: 6,60 m
Beam: 2,50 m
Draught: 0,70 m
Weight: 1.750/2.200 kg
Salon headroom: 1,95 m
Cabin headroom: 1,56 m
Fuel tank: 130 l
Water tank: 100 l
Max. passengers: 6
Berths: 2+1(2)
Cabins: 1
Engine: 150 HP
  •  Share on X

Most read