Athena is currently the most attractive yacht of Riva´s fleet, with dynamic and pompous outside lines. With her crystal qualities and recreational styling, Athena has sail in to paths of distinctive elegance that is the main "culprit" for exclusivity of this model. Clean, essential, elegant and refined, modern and original lines characterise the 115’ Athena: a boat of extraordinary design and unique style able to seduce and conquer the most demanding boat owner. Its particularly streamline contours include a “pilot house” situated towards the bow thus enabling a bridge of over 22 m in length. Moreover, there is also a closed hard top version, delimited by vast windows that offer a 360 degree view of the sea and create a space obtained from the vast fly bridge of over 20mq where a cosy and relaxing environment can be set up (a study, cinema or reading room or gym) behind which there is a private terrace for the shipowner.
Extreme attention has been given to the privacy on board, creating two separate and independent access to reach all the zone on the boat, one for the crew and one for the boat owner. Even the stern garage area, entirely covered in teak, thanks to the innovative layout of the rotary actuators, not only houses a tender or two ski jets, but also turns into a reasonably sized beach (over 15m?) enabling easy access to the sea. Internal spaces are laid out in a very versatile and flexible way, whilst the 115’ Athena No 1 on show here has a special layout and fittings requested by the customer. The yard proposes subsequent versions have 4, 5 even 6 cabins with the master cabin on the main bridge towards the bow or below deck. The interior furnishing, enriched with unusual elements, expression of contemporary Italian design and highlighted by the natural light from the vast side windows, presents harmonious solutions able to arouse admiration and emotion and transmit the sensation of a perfect equilibrium between elegance and sobriety.
This boat has been designed and built respecting the typical construction standards applied to mega-yachts in terms of the materials chosen and solutions adopted. This aims to guarantee maximum comfort and functionality aboard, however leaving the customer room to manoeuvre in the choice of final solutions thus making the 115’ Athena an innovative semicustom yacht. As regards the motors, the 115’ Athena Riva has two Mtu 12V 4000 M90 motors that allow a maximum speed of 26.5 knots and cruising speed of 23 knots with cruising range of 600 nm.
Published: 2005
Photo: Riva
| Technical details | |
| Producer: | RIVA (IT) |
| LOA: | 115'00 ft |
| LOA: | 33,05 m |
| Waterline lenght: | 29,05 m |
| Beam: | 7,08 m |
| Draught: | 1,85 m |
| Displacement: | 125000/155000 kg |
| Fuel tank: | 22000 l |
| Water tank: | 3500 l |
| Septic water tank: | 850 l |
| Holding tank: | 850 l |
| Max. passengers: | 15 |
| Berths: | 8/10+5 |
| Cabins: | 4/5+3 |
Related articles
Pearlsea 56 coupe
Pearlsea 56 is built on a deep-V hull produced by vacuum infusion using epoxy resin instead of regular polyester or vinyl-esther, with in-laminated stringer system for better structural integrity
